ІRSTІ 53.31.21 №4 (2018г.) Kuzbakov Zh.I. The methods of destruction of solid materials are the basis of the crushing and fractionation technology in the preparation of raw materials for the metallurgical transformation. In order to reduce the energy intensity of crushing, the material fed to the crusher can be pretreated in such a…
The study of the evolution of structure formation during rolling of a foil blank, a screw and a longitudinal wedge mill
ІRSTІ 53.43.13 №4 (2018г.) Mashekov S.A., Maulenova M.R., Mashekova A.S., Tusupkalieva E.A. The article presents the results of studies of the influence of the number of passes during the rolling of strips in helical-shaped rolls, as well as single compression when rolling strips on a longitudinal-wedge mill on the parameters of the aluminum…
Corrosion-resistant multi-element coatings
ІRSTІ 53.01.97, 81.33.07 №4 (2018г.) Platonova Е.N., Syzdykova А.Sh., Guchenko S.А., Zavatskaya О.N., Kasymov S.S., Laurinas V.Ch., Yurov V.М. The paper gives a brief overview of earlier studies and obtained new results on multi-element hardening and corrosion-resistant coatings. In order to study coatings, modern methods of optical, electron and atomic force microscopy, X-ray…
Development of technologies hot rolling thin band of aluminum alloys 1050 longitudinal wedge mill using the method of physical modeling
№3 (2018) Mashekov S.A., Dyja H., Maulenova M.R., Tusupkaliyeva E.A. Using the modern high-precision Gleeble 3500 system, the patterns of variation in the resistance of deformation of an aluminum alloy 1050 under physical modeling of rolling on a longitudinal-wedge mill with various processing regimes are studied. With a single position, a change in…
Monitoring of quality of technological schemes at metallurgical enterprises for the production of nickel
скачать Кazhikenova S.Sh., Bekmagambetova E.K. Abstract. The novelty of the thesis consists in that for the forts time to the analysis of the technology of chemical-and-metallurgical processes and schemes there will be applied objective and fundamental information criteria expressed in universal units, i.e. bits. The prospect of the study covers any metallurgical and…
Influence of the mechanical deformation scheme on resistance of deformation, formation of structures and violation of continuity of brass L63
Mashekov S. A., Henryk Dyja, Urazbayeva R.E., Tussupkaliyeva E. A. Abstract. The influence of such types of deformation as tension, torsion, tensile torsions, etc. arising in various types of rolling, on the resistance of deformation, the formation of structures and the ultimate plasticity of brass L63 are considered in the article. The STD 812…
ПОЛУЧЕНИЕ УГЛЕРОДИСТОГО ФЕРРОХРОМА МЕТОДОМ ЖИДКОФАЗНОГО РАЗДЕЛЕНИЯ ПРЕДВАРИТЕЛЬНО ВОССТАНОВЛЕННЫХ ХРОМОВЫХ РУД
Аннотация. На кафедре металлургии и литейного производства разработаны способы жидкофазного разделения продуктов селективно восстановленных металлов из различных материалов – шламов от медеплавильного производства, титаномагнетитовых концентратов, а также богатых хромовых руд кемпирсайского месторождения. Продукты после восстановительного обжига исходных хромовых руд, с последующим проплавлением в печи показали образования двух фаз четко выраженными границами – металл и шлак. В шлаковой фазе после разделения остаточное содержание Cr2O3 составило ~ 2,5 %. Металлическая фаза представлена в основном углеродистым феррохромом переменного состава по железе и хрома в структуре (CrxFey)23C6 совместно силицидами железа FeSi2 и хрома Cr3Si. Эксперименты подтвердили возможность переработки богатых хромовых руд мелких фракций, путем твердофазного восстановления с последующей выплавкой в электродуговых печах, при котором снижаются расходы не только на высококачественные металлургические восстановители и электроэнергию, но главном образом значительно понижается уровень загрязнения окружающей среды.
Ключевые слова: предварительное восстановление; хромовая руда, шлам, переработка руды, металлургия.